In Ufrii GB has modern diagnostic equipment - non-contact tonometer Kowa KT-800 and autorefkeratometer HRK-7000A.
Designed for objective determination of the intraocular pressure.
- Automatic centering. Accurate vertical and horizontal adjustment is made automatically. The operator should conduct a preliminary tip, by placing a luminous label inside the focus circle.
- Automatic selection of measuring range and soft flow of air. Improved
tion control system pressure at the discharge of air allows for accurate measurement the first time, there is no need to switch the measuring range (30 / 60 mm Hg. calendar). During the examination the patient feels only a short mild air flow. - A function definition is not enough open eyes. The measurement process does not begin until the eyes of the patient open enough.
- High-speed printing. Print the results of measurement takes less than 1 second. Automatically adjusts the emphasis to the chin. The height of the stop is adjusted by pressing the chinbutton.
- Automatically adjusts the emphasis to the chin. The height of the fence for chin is regulated by the press of a button.
Avtoreferaty
Designed to determine the refractive power of the eye, corneal curvature, measuring the distance between pupils, width of the pupil size and cornea.
Unlike their counterparts the device works on the principle analysis of wave reflected from the retina of light that allows a more precise identification of optical system aberrations and to select the best correction. Avtoreferaty
Main features of the device:
- serif">Pointwise graphical representation of the refractive power of the eye in the form of spatial maps of the wave front
- Mode peripheral keratometry, which is effective for a contact lens fitting
- Retroillumination
nny mode allows you to detect opacities in the cornea and lens - HRK-7000A automatically recognize the eye condition and, if necessary, enables the mode of "IOL"
- Using a special clamp, you can measure the base curvature of contact lens
- Has the function of automatic three-dimensional pointing at the eye
- Equipped with an electric lock for a chin controlled from the front panel
Measurement modes:
Combined refractometry and keratometry (K/R), refractometry (REF), keratometry (KER), the measurement of the base curve of contact lenses (CLBS), peripheral keratometry (KER P), retroillumination
Advantages:
- SLD & vysokochuvstvitel
velikoletna. obayatelnaya, charming CCD matrix - New avtoreferaty
R HRK-7000A provides clear images through the use of SLD (Super Luminescent Diode) and vysokochuvstvitel Noy CCD matrix. - The noise suppression technology provides accurate results with refractive error, cataract or IOL.
- Measurement periphery: HRK-7
000A provides measurement data of keratometry on the periphery that can be very helpful in the selection of contact lenses. - Color LCD display 6.5: Color TFT LCD display ensures crisp images in real time.
- A graphical map display of the wave front: a Graphical
display of some refractive errors helps to better understand the eye condition of the patient and the reliability of the assessment. - Accurate data keratometry: To
Severnye keratometry data through the use of two mirrored rings and two LEDs. - Easy set-up: Convenient
and intuitive interface allows the user to easily set the desired function and change the settings without exiting the current page. - Easy lock: You can lock the device with a single button is pressed
- Mode retro Illuminati
tional survey: PR and using this mode you can see the defects of the lens or damage to the cornea, which helps you determine how healthy a patient's eye. With high refractive the patient's you can check the sphere, cylinder, and axis that cannot be done in normal mode surveys - The experience refraction HRS-3100: Huvitz HRK-7000A works great in the composition of the optometric system HRS-3100, (workstation, projector signs, digital refractor, lensmeter). In addition, the device can work with an external monitor for a visual display of the measurement results.